leadsfor.blogg.se

Mad max sawed off shotgun
Mad max sawed off shotgun




mad max sawed off shotgun mad max sawed off shotgun

If one cap is sitting higher than the other two, then it'll be struck first and ignite before the others. I'm intrigued by this one, there must be a relatively simple answer to this It seems to me that if all three caps are seated at the same depth in the cartridge and that the three detonator pins in each barrel are level, then all three caps should ignite at the same time. This prevented shotgun from cocking at all, as after breaking it there was some kind of blockage. I forgot details, but once or twice when I put the front grip back, it did not interlock properly with moving parts in the main grip. They are merely hooked, and if you "break" them at 90 degress and pull up, you will separate the parts. after you remove front grip, barrels are not held to the main grip. When cocking you need to push real hard, until you hear two consecutive clicks - this corresponds to two hammers.Īs you can see from my other photo in Hudson thread, there is not enough clearance, parts touch and pot metal chips off from underside. This shows two protruding areas on grip face which are what cocks hammers via two silver "thingies" (I always run out of proper English words for such parts). disassembled bottom grip (left) and barrel underside (right).

mad max sawed off shotgun

broken shotgun, top cartridge is properly sitted, bottom one does not have caps aligned to prongs.broken shotgun, you can see two holes through which hammers will jump out.Still, from about 30cm distance (15 inches for those of you on Islands ) I did feel the heat. Fortunately I always wear glasses (just in case), and cap was pointing parallel to my face. Trying to pull out a live cap is not the best idea - when I stupidly tried to remove them for storage, the first exploded in my face. The are pushed inside fully, after shooting they require a needle-like tool to pull them out. cartridge top, with three caps installed.cartridge bottom (flat, middle gets hit by.They seem to be the same size/depth, but it's not easy to measure them precisely. Cerwyn - this should give you an idea what MadMax shotgun looks like in these places:






Mad max sawed off shotgun